Compress Video Smaller for Facebook Uploading

Thanks to Facebook social website, we can connect with our friends and the world closely. Over 4 billion video views happen to Facebook everyday. And users would like to tell rich stories with Facebook video, not only in the timeline, but also in business ads, and covers. During Facebook uploading process, you may meet some unknow factors that stop you uploading the videos to this social website. Nowadays, people prefer capturing videos with iPhone, GoPro, DJI drones, Sony/Panasonic/Canon camcoders you need to compress or convert footage to Facebook supported video format before uploading. This article makes it clear on Facebook video uopload specs and how to compress video smaller for Facebook without video quality loss.

Know Facebook Supported File Formats Well

When sharing video on Facebook, you may be recommended to use the MP4 and MOV format, in fact, you also can use the 3g2, 3gp, 3gpp, asf, avi, dat, divx, dv, f4v, flv, m2ts, m4v, mkv, mod, mov, mp4, mpe, mpeg, mpg, mts, nsv, ogm, ogv, qt, tod, ts, vob, wmv which are all supported by Facebbok, except the video format, Facebook limits the video parameters, like the video codec, video frame, video bitrate, audio channels, vudeo size, video length, etc. You must make sure your video is accepted by Facebook.

Video Profile Settings
Codec	The best format to upload to Facebook is H.264 video with AAC audio in MP4 or MOV format. It currently gives you a great bang for your buck in the file size to relative quality ratio, offering the best video compression available, and due to the file size limitations, this format is the optimal choice for Facebook video. And there's no need to change the parameter during Facebook uploading.
Resolution	Use a file with the larger edge of the video constrained to1280px. If your video is less than 1280px in size on the larger edge, try to keep your dimensions to multiples of 16px for best compression.
Frame Rate	Usually videos have the best quality if the frame rate is between 25-30 fps. So you are recommended to keep the frame rate of your video at or below30fps.
Aspect Ratio	The aspect ratio of the video must be within the range of9x16 to 16x9which most videos should have, and the video exceeding the file size or length that the upload page suggests will be rejected.
Bitrate	There is no recommendation for Bitrate as it highly rests upon codec. So you are suggested to optimize video for resolution, aspect ratio and frame rate rather than bitrate.
Audio Profile Settings
Codec	MP3 is preferred
Samping Rate	Use stereo audio with a sample rate of 44,100hz.
Channels	The number of audio channels will be maintained for stereo and mono streams. 5.1-channel audio will be down-mixed to stereo. All other channel configurations are currently unsupported.

Other tips for Facebook video uploading

1. Keep in mind that the maximum length for a video is 120 minutes and the maximum file size is 4.0 GB.
2. Check that you're using the latest version of your browser.
3. Uploading a video works best when you have a strong network connection.

Normally, many people would like to record their life via camcoders, and some recordings in a format that FaceBook doesn't support, or the video in high definition are too long or too large for Facebook and need to trim and compress. You need a video converter or video editor to help you reach that.

For Windows users, Pavtube Video Converter Ultimate is deserved to try. It is a video converter, as its name shown, but also a video editor with some simple and essential video editing functions. With it, you can easily transcode your life recordings, game play recordings to FaceBook playable video and audio format such as MP4, WebM, MOV, etc encoded with compatible video and audio codec. You can trim the recordings length to meet and FaceBook supported video length and size requirement. You also can compress videos by adjusting video resolution, bitrate to reduce the videos size.

To make your videos different, you also can add some subtitle to narrate the videos and add a text/image/video watermark to your videos. Aspect ratio is also supported to change in this video converter. If needed, you even can remove the audio in the video or replace audio from it. Now, download it and try to convert and compress your videos to Facebook supported one.

Quick Guide to Convert and Compress Videos to FaceBook

Step 1: Import video you want to upload to Facebook

Start the FaceBook video converter program on your computer, click "File" > "Load Video/Audio" or "Load from folder" button to import videos into the program. "Drag-and-Drop" and "Batch Conversion" features are also supported. If you loaded multiple clips, you also can merge the video into a single one file.

Step 2: Output FaceBook best uploading format

Click "Format" bar, from its drop-down options, choose FaceBook compatible uploading format from "Common VIdeo" > "H.264 High Profile Video(*.mp4)". You also can choose other FaceBook supported video formats such as HTML5 WebM.

Step 3: Compress videos

Click "Settings" to open the "Profile Settings" window, here you can adjust the output video codec, resolution, bit rate, frame rate and audio codec, bit rate, sample rate and channels to let the videos more fit in FaceBook. To compress videos, the most effective way is to reduce the video bitrate. You can change the bitrate value to see the target video size in the below chart.

Edit videos/recordings Before Export

Trim videos/recordings: In “Video Editor” there are seven edit tabs: Trim, Crop, Text Watermark, Image/Video Watermark, Effect, Audio Editor and Subtitle.  The "Trim" feature allows users to decide where to start and where to end when converting the clips, so that unwanted segments will be cut out after conversion.

Crop videos/recordings: The "Crop" facility enables users to get rid of the black edges and unwanted area of the image.

Keep original videos/recordings aspect ratio and cropped aspect ratio

To keep original aspect ratio, users need make sure the "Display aspect ratio” and the "Size (pix)" in "Settings" option are all set as "Original". If you want to keep the cropped aspect ratio, Pavtube software offers several aspect ratios for you to choose from, including 16:10, 16:9, 5:4, 4:3, 3:2, and 2:1.

Add Watermark to Gameplay recordings: You can add text/video/image watermark to selected videos. You can either set parameters or drag the text on preview screen to set its location.

Audio Editor:You can either replace/remove original audio in the videos/recordings, or set audio fade in/out effects.

Subtitle: In this tab, you can add *.srt or *.ass/*.ssa subtitle-files to the videos/recording video as hard subtitles.

Step 4: Start to Convert and Compress Videos for FaceBook

Clicking the Convert button on main interface, you can go to Conversion window to start to convert videos/recordings to FaceBook. After the conversion, you can click Open output folder to popup output directory with the converted files.

How to Upload video to FaceBook?

1. Choose Add Photo/Video in the Share box at the top of your Home page or Timeline.

2. Click Upload Photos/Video.

3. Select a video file from your computer.

4. Click Post.

Related Articles

• How to Smoothly Upload and share 4K Video on YouTube/Facebook/Vimeo?
• How to Share AVCHD on Facebook
• Fail to Play Facebook Video with Chrome or FireFox Web Broswer
• Upload iMovie Videos to YouTube, Vimeo, Facebook
• Converting WMM Video to MP4 for Facebook

Hot Articles & Reviews

• How to Split, Modify or Compress Phantom 4 4K video for uploading to YouTube/Vimeo/Facebook
• How to convert and upload DVD to Facebook?
• How to share iTunes movie clips on Facebook with Pavtube ChewTune?
• Upload and Share Funny Christmas Video on YouTube/Facebook/Vimeo
• Upload and Share Summer Vacation Video on YouTube/Vimeo/Facebook

Any Product-related questions?support@pavtube.com

Source:http://device-camcorder-tips.blogspot.com/2018/04/compress-video-smaller-for-facebook-uploading.html

How to Use Nvidia GeForce Graphic Card to Encode H.265 with 30X Speed

More and more people prefer to encode media to H.265/HEVC codec, why? High Efficiency Video Coding (HEVC), or H.265, is a video compression standard designed to substantially improve coding efficiency when compared to its precedent, the Advanced Video Coding (AVC), or H.264. With an increasing growth of video streaming on the Internet over popular websites such as Netflix and YouTube, and with 4K cameras gaining new ground in the market, a considerable amount of storage and bandwidth is required. HEVC promises a 50% storage reduction as its algorithm uses efficient coding by encoding video at the lowest possible bit rate while maintaining a high image quality level. In the current market, more and more devices add support for playing HEVC videos, like iPhone X, Apple TV 4K and more.

You will find that H.265 codec encoding time is much longer than other codes especially when you are using a old dual-core desktop to do the encoding work. In the current market, there are dozens of video converter programs that support hardware acceleration techs for encoding HEVC, but few of them can really satisfy you. Fortunately, I will share the best one with you which allows you to speed up H.265 encoding speed to 30x. Can't wait? Here we go.

Nvidia Geforce Graphic Card that supports NVENC technology

To enable H.265 encoding with Nvidia NVENC GPU acceleration, your Nvidia Graphic card should support NVENC technology, following part has listed the specific Nvidia GeForce graphic cards with NVENC technology support:

Supported Nvidia GPU	Kepler	Maxwell	Pascal
	GeForce GT 705  GeForce GT 710  GeForce GT 720  GeForce GT 730  GeForce GT 740  GeForce GTX 760  GeForce GTX 760 Ti  GeForce GTX 770  GeForce GTX 780  GeForce GTX 780 Ti  GeForce GTX Titan  GeForce GTX Titan Z  GeForce GT 640M LE  GeForce GT 640M  GeForce GT 645M  GeForce GT 650M  GeForce GTX 660M  GeForce GTX 670MX  GeForce GTX 675MX  GeForce GTX 680M  GeForce GTX 680MX  GeForce GT 730M  GeForce GT 735M  GeForce GT 740M  GeForce GT 745M  GeForce GT 750M  GeForce GT 755M  GeForce GTX 760M  GeForce GTX 765M  GeForce GTX 770M  GeForce GTX 780M  GeForce 825M  GeForce GTX 860M  GeForce GTX 870M  GeForce GTX 880M  GeForce 920M	GeForce GTX 745  GeForce GTX 750  GeForce GTX 750 Ti  GeForce GT 945A  GeForce GTX 950  GeForce GTX 960  GeForce GTX 970  GeForce GTX 980  GeForce GTX 980 Ti  GeForce GTX Titan X  GeForce 830M  GeForce 840M  GeForce 845M  GeForce GTX 850M  GeForce GTX 860M  GeForce 930M  GeForce 940M  GeForce GTX 950M  GeForce GTX 960M  GeForce GTX 965M  GeForce GTX 970M  GeForce GTX 980M  GeForce GTX 980	GeForce GTX 1050  GeForce GTX 1050 Ti  GeForce GTX 1060  GeForce GTX 1070  GeForce GTX 1080  Nvidia Titan X

Best tool for Encode H.265 on Nvidia GeForce Graphic Card

Pavtube Video Converter Ultimate | for Mac has perfect support for H.265 encoding acceleration on a PC that runs above listed Nvidia GeForce Graphic cards. With the program, you can comprehensively encode H.265 MP4/MKV codec from virtually any digital file formats and also commercial Blu-ray/DVD disc.

Other great features and functions of Pavtube Video Converter

- Encode virtually any digital file formats to H.265 MP4/MKV 
- Encode commercial Blu-ray/DVD disc to H.265 MP4/MKV 
- Adjust output H.265 profile parameters including video codec, resolution, bit rate, frame rate, audio codec, bit rate, sample rate and channels, etc. 
- Edit H.265 files by trimming, cropping, splitting, merging, adding watermark, applying special effect, change video brightness, contrast and saturation, deinterlacing video, etc. 
- Decode H.265 to H.264 or other popular file formats, hot devices and programs preset profile formats.

How to Use Pavtube Video Converter Ultimate for fastest H.265 Encoding on Nvidia GeForce Graphic Cards?

Step 1: Import video or load Blu-ray/DVD disc into the program.

Start the program on your computer, click "File" > "Add Video/Audio" to import digital file formats into the program, for load Blu-ray or DVD disc, insert your DVD disc into your computer's optical drive and your Blu-ray disc into an external Blu-ray drive, click "File" > "Load from Disc" to load Blu-ray/DVD disc into the program.

Step 2: Enable GPU Encode Acceleration.

Click "Tools" > "Options", in the opened "Options" window, click "Acceleration" menu, then check "Enable GPU Encode Acceleration" otpion so that the program will accelerate converion speed when encoding video/Blu-ray/DVD to H.265/HEVC codec.

Step 3: Output H.265 MP4 or MKV format.

Click "Format" drop-down bar, scroll down to select "Common Video" > "H.265 Video(*.MP4)" as the output file format.

For outputting H.265 MKV format, select "HD Video" > "MKV HD Video(*.mp4)" to output, then hit "Settings" on the main interface to open "Profile Settings" window, under Video settings panel, click "Codec" drop-down selection, choose "H.265" as your final output file codec.

Step 4. Adjust output file parameters (Optional)

You are allowed to adjust video and audio parameters if you are not satisfied with the default settings. Presets like size, bitrate, frame rate, audio channels, etc. can be customized in your own way.

Step 5: Begin the H.265/HECV codec encoding process.

After all settings is completed, hit right-bottom "Convert" button to begin the conversion from video/Blu-ray/DVD to H.265/HEVC encoding process. 
When the conversion is completed, you will get a perfect quality H.265/HEVC file with smaller file size for smoothly viewing and streaming on different devices.

Hot Saerch: How to Rip 4K Blu-ray to H.265 MKV Utilizing CUDA on Windows?

Related Articles

• Rip 4K Blu-ray to H.265 with Nvidia GPU Acceleration
• Top 3 DVD Movie Subtitle Editors for Windows 10
• Extract SRT subtitles From "Ant-Man" Blu-Ray for Plex
• Remove Forced Subtitles from Blu-ray/DVD Movies
• Rip Blu-ray/DVD with Forced Subtitle Tracks Preserved

Hot Articles & Reviews

• Extract Individual Chapters from Bluray/DVD
• Top 5 Best Free Video Joiner Softwares
• Split Large Video into Small Parts by File Size, Count or Length
• Cut/Trim/Extract Video Segments without Quality Loss
• How to Resize Video on Mac (macOS Sierra Included)?

Any Product-related questions?support@pavtube.com

Source:http://device-camcorder-tips.blogspot.com/2018/04/use-nvidia-geforce-graphic-card-to-encode-h265-with-30x-speed.html

Get the Top UHD 4K Blu-ray Converter to Copy UHD Blu-ray Discs

Ultra HD 4K Blu-rays have the best picture quality possible for your 4K TV, even better than streaming 4K from Netflix or Amazon. Even better, many discs have high dynamic range (HDR) and wide color gamut (WCG) content, which provide a much more noticeable improvement than 4K resolution, provided your TV can deliver it.

What do you need to watch a UHD Blu-ray

Sadly, Ultra HD discs won't play on a normal Blu-ray player, though you can play older Blu-ray discs on an Ultra HD player. In order to get a true 4K experience, remember that you'll need an Ultra HD Blu-ray player, an Ultra HD TV and some discs, obviously. There are a few important caveats, though.

First, you'll need to make sure your TV supports at least the HDMI 2.0 standard. Most TVs from the last year or so will, but very cheap models and some models from 2014 or earlier might not. Check your manual or Google the model number to find out - the even newer HDMI 2.1 standard should also be fine.

If you don't have a 4K TV, your 4K Blu-ray player will still work, but it will only display images in 1080p. Buy a regular Blu-ray instead of a 4K version and it will still play in 3840 X 2160 resolution, but it won't be a native 4K image and will be noticeably different than had you used an Ultra HD Blu-ray.

There's no denying Ultra HD Blu-ray and 4K TVs are luxuries, but they're luxuries worth having. And if you want the absolute best possible picture from your 4K TV, Ultra HD Blu-ray is where you'll find it.

"But I hate physical discs," you say. I hear you. But for people who want peak image quality, a disc is still one way to go. What if you have no 4K Blu-ray Player or have no plan to buy one? The other way is to use a Blu-ray ripping tool to rip/convert 4K UHD Blu-ray to digital files for streaming to 4K TV without needing a 4K Blu-ray player.

Best UHD 4K Blu-ray Ripper - Pavtube ByteCopy

In fact, there are many Blu-ray ripping tools on the market that can deal with common Blu-ray discs. However, when it comes to dealing with 4K Blu-ray discs, many Blu-ray rippers fail to rip it cause a 4K Blu-ray has higher and stricter encyption and normal Blu-ray decrypter cannot bypass all the copyright protection. But you are lucky today, I will highly recommend you Pavtube ByteCopy (available for Windows and Mac users) which can rip, convert, and copy 4k Blu-ray discs seamlessly and losslessly.

The UHD 4K Blu-ray Ripper Output Options

• Directly Copy UHD 4K Blu-ray Disc
  A 4K Blu-ray disc will be 50GB - 100GB. Full copy 4K Blu-ray disc to hard drive will take too much space. Pavtube ByteCopy can directly extract main title of the 4K Blu-ray without preserving other extras. Besides, you can also use the UHD Blu-ray Ripper to entire copy the 4K Blu-ray disc to a folder devided into BDMV folder and CERTIFICATE folder, making an exact copy, indistinguishable from the original. This way can contain the reviews, ads, subtitles, extras and other everything in the 4K Blu-ray disc, no any loss.
• Lossless Copy 4K Blu-ray to Popular Video Formats
  Enables you to rip and convert 4K Blu-ray discs to popular video formats like MP4, MOV, M4V, AVI, MKV, MKV, FLV, M3U8, etc for playback on iDevice, Android devices, game console, PC, Mac, and editing software. Apart from as a 4K Blu-ray converter, it even can create 3D SBS/TB/Anaglyph MP4, 3D MKV, 3D WMV for Daydream View, PS VR, Gear VR, VR Box 2.0, Oculus Rift CV1, Oculus Rift DK2, HTC Vive, etc. What's more, Pavtube ByteCopy can rip 4K Blu-ray to HEVC MKV, H.265 MP4 keeping 4K resolution.
• Keep Multiple Audio/Subtitle tracks
  Normally, Blu-ray contains DTS, AAC, Linear PCM (LPCM), Dolby Digital (DD), Dolby Digital Plus (DD+), Dolby TrueHD, DTS Digital Surround, DTS-HD High Resolution Audio, DTS-HD Master Audio. The best 4K Blu-ray Ripper can allow you to rip 4K Blu-ray keeping DTS-HD Master Audio, DTS Digital Surround, etc audio.
• Customize 4K Blu-ray Movie Parameters
  Allows you to adjust video parameters like video audio codec, frame rate, bit rate, resolution, sample rate, channels according to your needs. This feature-rich software also work as a proferssional video editor. With it, you can trim BD movies length, add external subtitles to it, replace or mute audio, and more.

Quick Guide to Convert UHD Blu-ray Movies

Step 1. Load UHD BD with this program

Install the best UHD Blu-ray ripper on PC. then open it, click the "Load from Disc" icon to import the UHD Blu-ray Disc. You also can load the BDMV folder by choosing the "Load from folder" from the dropdown list of "File", of course, you also can choose to load the ISO images too.

Step 2. Choose output format according to your own needs

Click "Format" bar, you will see hundreds of video formats here. You can navigate to "HD Video" and select "H.264 HD Video(*.mp4)". Or you can choose other formats as you like.

Tips: For those people who want to preserve multiple video/audio tracks you can navigate to "Multi-track Video" > "Lossless/encoded Multi-track MKV(*.mkv)" for output. You can get lossless audio streams without transcoding. At the video setting windows, you also can choose the chapters, audio tracks, and subtitles.

Click the Setting button and adjust the video. Here you can rip Blu-ray with Dolby 5.1/7.1 tracks, open "Multi-task Settings" window, click "Audio" tab, check "Encode" to get encoded MKV files with Dolby Digital 5.1/7.1 audio saved. In this way, you also can rip Blu-ray with original DTS-HD Master audio track.

Step 3. Adjust video parameters

If you have defined the output format, then click the "Settings", here you can adjust vdieo parameters like: video/audio codecs, bitrates, frame rates, channels, etc.

Step 4. Start the UHD Blu-ray conversion

After all settings are done. Return back to main interface, and click convert, it will begin to copy your UHD Blu-ray movies. Wait for a while, when it is over, click Open, and it will pop up a folder with generated files. Now you can transfer the covnerted movies to your target devices for watching on the go.

Related Articles

• Top 5 Free Blu-ray Movies Download Sites
• Best 4K Blu-ray Ripper: UHD Blu-ray Ripping for PC
• Remove Blu-ray Copy Protection AACS, BD+, Cinavia
• Best DVDShrink Alternative Software to Backup and Compress DVD
• How to Play Blu-ray Discs Movie with Kodi?

Hot Articles & Reviews

• http://www.multipelife.com/play-blu-ray-with-kodi.html
• Tips for Playing DVD ISO/IFO Files on Samsung Galaxy Note 8
• Rip Blu-ray/DVD to ASUS Transformer 3 Pro on Windows or Mac
• Tips for Ripping DVD to Eve V for Enjoyment
• How to Watch Blu-ray/DVD Videos on MateBook E

Any Product-related questions?support@pavtube.com

How to Attach External Subtitle File into a MKV File with Ease

When you have downloaded a MKV video from the internet but you found that there is no subtitle track in the movie during the playback, how to do now? As we all know, subtitle plays an important role in the movie, especially when the movie in a foreign language. Subtitles help us to know the movie better, so to solve the question in the first sentence, an easy way is to attaching subtitles to MKV files with a right tool you are available to get and use. This article will share the best tool for you, with Top 10 subtitle download sites for your movies & TV series.

Part 1. How to add SRT/ASS/SSA Subtitles to MKV Video with Pavtube Video Converter Ultimate

Though there are tons of subtitle to MKV software on the internet, many of them work slowly and output quality is not so satsiafactory. Well, Pavtube Video Converter Ultimate (available for both Windows and Mac users) always stands out from its competitors and will meet all your needs. It allow you to import 3D Blu-ray movies, 2D Blu-ray movies, Blu-ray Folder, Blu-ray ISO Image File, DVD movies, DVD Folder, DVD IFO File, DVD ISO Image File, H.264, MP4, MOV, MKV, VOB, WMV, MPG, Tivo, AVI, Divx, M4V, QT, M4A, WMA, WAV, MP3 ect as you like and output any video format you want. Furthermore, you also can output optimised device presets like Apple devices, Android devices, Windows devices, Game consoles and media players with the best standard settings, and you don't need to worry about A/V parameters anymore.

Best of all, it allows you to attach downloaded SRT/ASS/SSA subtitles to MKV, MP4, BD, DVD, MOV etc with just three steps. Below, we will show you the steps of adding subtitles to MKV file.

Step 1. Load MKV videos

To import your videos to the program, please go to the main menu and then choose "Add video" icon. Alternatively you can drag and drop the media into the converter.

Step 2. Add subtitles to your movie

Note: Before adding subtitles to your MKV, you have to define the output video format you want. Click Settings, you will enter a list with hundreds video formats, you can choose to keep the MKV as final generated file formats, or change it to MOV, MP4, AVI and others according to your needs.

Then click the "Edit" icon on the main interface to open "Video Editor" window, under the "Subtitle" panel, check "Enable", then browse your local drive to import the "SRT/ASS/SSA" subtitles that you want to add to movies.

Kindly note:  The subtitles that you add your movies with our application is hard subtitles, which means the subtitles will be printed on the movies permanently.

Step 3. Start inserting subtitles to MKV file

Go back to the main UI and click "Convert" to start inserting SRT/ASS/SSA subtitles to your movies.When the conversion is over, click "Open output folder" to locate and find the generated files, then will be able to watch movies and TV series with subtitles easily either on your computer or portable devices.

Part 2. Top 10 Subtitle Download Sites for You

A great subtitle download site should not only be rich in resources but also be safe and flexible. Make sure you are not downloading any malware or getting any virus to harm your computer when you just simply want to download subtitles.

Subtitle Download Sites	Descriptions
Moviesubtitles.org	The largest collection of subtitles for movies, here you can find subtitles for the most popular movies and TV series. Moviesubtitles.org offers multiple-language subtitles, and all subtitles here are packed with WinZip, you must unpack to use it.
Subscene	Subscene.com is the most widely used subtitle download site among the others, this Indonesia based subtitle download site offers the richest resource in Indonesian, and Arabian. No matter you want to watch South Korean soap opera or American Hollywood movies, and it got a great deal of loyal users and contributors.
Open Subtitles	Subtitles free download for DivX movies, search in many languages from a multi-language website. Thousands of translated subtitles for XviD movies and TV series. You can download tonnes of DivX subtitles from the biggest Open Subtitles database.
DivX Titles	DivxTitles.com is a place where you will find every single DVD or DivX subtitle you are looking for. There are 135218 DVD and DivX subtitles in their database so its unlikely you will not be able to find subtitle for your movie or TV show.
DivX Subtitles	DivXSubtitles is well detailed with crucial information on all the latest movie subtitles in the market. There is the date of release, title of the movie, language used and its uploader, which makes it easy to choose the best subtitles to download.
Subtitles Box	Subtitles Box uses divx subtitles for your favorite movies, free subtitles downloads, movie & subtitles news and gossip, actors and celebrities profiles update, hot new stories about movies and movie stars, a divx subtitles calendar with all the hot dates in movie industry this year.
My Subtitles	In My Subtitles, you can download all the Subtitles of the DivX Movie Database hosted by MySubtitles.com. You can also upload subtitles by registering in My Subtitles. You can download all the latest subtitles for free.
All Subs	All Subs contain all the subtitles in all the famous languages. You can download subtitles of all the DivX movies.
TVsubtitles.net	TVsubtitles.net is famous for its diversity of TV program subtitles, on this subtitle download site you are free to find and download subtitles of TV shows, Talk shows, Netflix TV Series, Hollywood movies, etc.
SubtitleSource	This site supports three main formats namely XviD, DivX and x264. They are all well suited for TV series and movies so make sure your searches are precise in relation to quality and language.

Related Articles

• Extract SRT subtitles From "Ant-Man" Blu-Ray for Plex
• http://www.multipelife.com/extract-srt-subtitles-from-bluray-for-kodi.html
• How to Extract SRT Subtitle from DVD Movies?
• Remove Forced Subtitles from Blu-ray/DVD Movies
• Rip Blu-ray/DVD with Forced Subtitle Tracks Preserved

Hot Articles & Reviews

• Top 5 Best Free Video Joiner Softwares
• Split Large Video into Small Parts by File Size, Count or Length
• Cut/Trim/Extract Video Segments without Quality Loss
• Add Horrifying Video/Image/Transparent Text Watermark to Video
• How to Apply Scary Invert Effect to Halloween Video?

Any Product-related questions?support@pavtube.com

How to Make Blu-ray/DVD Playable on Samung Galaxy S9/S9+

The Samsung Galaxy S9 and Galaxy S9 Plus have been launched for several days since March 16, let's have a look at the new Android phones. You won't find a bigger and better Android phone than the Samsung Galaxy S9 Plus, thanks to its oversized 6.2-inch curved screen and low-light-defeating dual-lens camera. Sure, it looks exactly like last year's S8 Plus, but it does fix the fingerprint sensor location and speakers (now stereo). 

With this smartphone in hands, transferring all your Blu-ray/DVD collections to it for watching when you're out for travelling to kill the boring time. Maybe, many people will say they can purchase the BD/DVD movie form the online movie store, it will be a waste if you have already had the same BD/DVD disc in hand.

There are lots of Blu-ray/DVD ripper which can copy and convert the movies form the plastic to Samung Galaxy S9/S9 Plus playable movies. However, the point is how to get the best one in the market. You are in the right place, Pavtube BDMagic | for Mac (review) always stands out from its competitors, and recently, it has upgraded to v4.9.2, added support for Blu-ray AACS MKB v63. It allows you to convert Blu-ray/DVD to H.264/H.265 MP4, H.265 MKV, AVI, MOV, M4V, WMV, WAV and more for playback on Samsung Galaxy S9/S9 Plus, iPhone X/8/8P/7/7P, iPad, Xbox one, PS4 Pro and other popular devices.

To get the best video and audio playback effect on Galaxy S9 (plus), you can use the "Crop" function to adjust output aspect ratio to let it fit with your smartphone screen display, flexibly tweak the output video codec, bit rate, frame rate, resolution or audio codec, sample rate, bit rate, channels, etc. With this perfect tool, you can also flexibly set subtitles on your own. You can select desired subtitles from original Blu-ray/DVD movies, enable forced subtitle option to disable the traditional subtitles while still preserving the subtitles that translate foreign language speaking parts. If the original Blu-ray/DVD movie doesn't contain you wanted subtitle languages, you can download a subtitle file in your first language and then add subtitles to your movie files.

Step by Step to Rip and Play BD/DVD Movies on Samsung Galaxy S9 (Plus)

Step 1: Load movie disc into the program

Launch the program on your computer, click "File" > "Load from disc" to load commercial Blu-ray/DVD disc with copy protection to the application.

Step 2. Select output video format for Galaxy S9/S9 Plus

Press “Format” drop-down menu and then select a video container format that the Galaxy S9/S9 Plus supports like MP4, WMV, AVI, etc. You can also select HD MP4, HD WMV, HD MKV, HD FLV, etc format from "HD Video" category.

After that, click the "Settings" button to adjust the output parameters including “resolution”, “bitrate”, “frame rate”, and “codec” to make the output video play best on your Galaxy S9/S9 Plus.

Step 3: Start Blu-ray/DVD to Samsung Galaxy S9/S9 + ripping process

After you have finished all the settings, go back to the main interface, press the right-bottom "Convert" button to start to convert Blu-ray/DVD to Galaxy S9/S9 + with original video/audio quality.

When the conversion is completed, click "Open output folder", a window will pop out with all your converted files. Then feel free to transfer converted files to Galaxy S9/S9 Plus for playback anytime anywhere. 

Galaxy S9 vs S9+

S9 and S9+’s obvious difference is the display size. Galaxy S9’s display is 5.8 inches while Galaxy S9+’s display is 6.2 inches and with the increased size comes an increase in power. The S9+ has a 3,500 mAh battery where the S9's battery is 3,000 mAh. Additionally, the S9 will give you 4GB of RAM while the S9+ will give you more with 6GB of RAM. Don't worry both of them support microSD cards for additional storage expansion of up to 400GB.

However, the biggest noticeable difference between the two and what makes the S9+ stand out is its dual cameras. The S9 features a single lens camera while the S9+ features a dual lens camera that offers dual optical image stabilization and 2X optical zoom. Both feature super slow mo though, so we got you covered!

Specifications

So what makes Galaxy S9 and S9+ better than Galaxy S8 and S8+? The S9 and S9+ have a faster processor, more memory, and larger screens to name a few of the improvements from the S8 and S8+. Want to know all of the changes, check it out for yourself.

Here are the specs:
Galaxy S8 Specs
Galaxy S8+ Specs

Galaxy S9 Specs 
Galaxy S9+ Specs

Related Articles

• Watch Videos on Galaxy S8/S8 plus
• Make Unique Ringtone for Galaxy S7/S7 Edge
• 10 Common Galaxy S6 Problems & How to Fix Them
• Samsung Note 8 Supported Video Formats
• Best Samsung Note 8 Video Converters in 2017

Hot Articles & Reviews

• Play DVD Movies on Galaxy S7 in Best Quality
• Convert Downloaded 3D Movie for Galaxy Tab Pro S Playback
• Which is the top Galaxy Note 4 Video Player? What is Galaxy Note 4 best supported format?
• Best Way to Play videos on Samsung Note 8
• 10 Best Smart Phones in 2017

Any Product-related questions?support@pavtube.com

Source:http://device-camcorder-tips.blogspot.com/2018/03/play-blu-ray-dvd-on-samsung-galaxy-s9-s9-p.html

Compress DJI Mavic Air 4K to 1080p for After Effects Editing

A marvel of engineering and design, the Mavic Air was built to go wherever adventure takes you. Inheriting the best of the Mavic series, this ultraportable and foldable drone features high-end flight performance and functionality for limitless exploration. The Mavic Air is the most portable DJI drone to house a 3-axis mechanical gimbal, with its angular vibration range reduced to 0.005°. Set in a triangular formation, gimbal dampeners help create even steadier shots. Best of all the Mavic Air shoots video at an incredible 4K 30 fps, recording at 100 Mbps to capture every second with UHD quality.

It is a wonderful idea to input the DJI Mavic Air captured 4K footage into Adobe After Effects for further editing. However, it will be CPU comsuming if you load DJI Mavic Air 4k into After Effect and try to render the final file. If you say you have owned a very power computer and can get this job done, okey, how about the final render file? It can be very easy to say that its size will be very very large after adding vdieo effects to it. So today what we are gonna discuss is how to compress DJI Mavic Air 4k to 1080p for better postproduction, and compress the large render files for better sharing.

Part 1. How to Compress DJI Mavic Air 4K to 1080p before After Effects Editing

To compress DJI Mavic Air captured 4k footage before inputting into After Effects, you have a good choice - finding a smart assistant which comes as a super compressor. Pavtube Video Converter Ultimate always stands out from it competitors will never let you down. It allows you to input 4K MOV, 4K MP4, 4K AVCHD, 4K MKV and output MKV, MOV, MP4, AVI, M4V etc with 4K/2K/SD/HD resolution, moreover, customizing video parameters like video/audio codec, resoluiton, bit rate, frame rate, channels etc are available here. Apart from video rosolution, video file size also depends on video bit rate, get smaller video size by lowering the bit rate.

Quick Guide to Compress DJI Mavic Air 4K to 1080p before After Effects Editing

Step 1: Load DJI Mavic Air 4K video into the program.

Start the program on your computer, click "File" menu and select "Add Video/Audio" or "Add from folder" to import DJI Mavic Air 4K video.

Step 2: Define output video format

Click "Format" bar, from its drop-down options, choose the best compatible uploading format from "Common VIdeo" > "H.264 High Profile Video(*.mp4)". You also can choose other video formats according to your needs.

Step 3: Compress DJI Mavic Air 4K to 1080p

Hit "Settings" to open the "Profile Settings" window, here you can adjust the output video codec, resolution, bit rate, frame rate and audio codec, bit rate, sample rate and channels. To compress 4k to 1080p, just type 1920*1080 in Size blank. If you prefer smaller video size, lower the video bit rate can help you achieve this goal.

Step 5: Start the conversion.

Start to compress DJI Mavic Air 4K video to 1080p conversion by hitting the right bottom convert button, when the conversion is over, you will have no limitation to upload DJI Mavic Air 4K video to After Effects. You will be surprise about the smooth editing process.

Part 2. How to Compress After Effects render file size for sharing

Above is the tutorials to help you compress the DJI Mavic Air 4k to 1080p for smooth editing. Almost all After Effects moive making lovers know that, although the file you input into Adobe AE is very small, the render file will be larger larger larger than what you input, cause you have done the footage's postproduction. So how to reduce the render file size? Here are two ways to help you solve the problems.

Method 1. How to reduce the render file size in Affter Effects

To reduce render file size in Affter Effects is to change the format to H.264, but how? Keep reading.

To render H.264 it's actually very easy.

1. From your Project window, select the sequence you wish to render.
2. Right click->Export Media (or File->Export Media)
3. In the Video tab, select H.264 for format

Then, in the basic video settings below, you can change to smaller-than-original resolution, low bit rates, etc.

Method 2. How to reduce the Affter Effects render file size via Pavtube tool

If you are not faniliar with the operation by reducing in After Effects, this method will be very easy for you. Open Pavtube Video Converter Ultimate and load the render file into it, then define the output format you like just like we just do above, then click Settings on the UI, screenshot like below.

Now you are able to adjust the output video codec, resolution, bit rate, frame rate and audio codec, bit rate, sample rate and channels. Apart from changing video resolution, you also can lower the bit rate to make the render file smaller.

Up to now, you may have no trouble to play the DJI Mavic Air 4k with any devices, or upload to Youtube Facebook, Twitter for sharing with thousands of net friends.

Related Articles

• Upload DJI Spark videos to Youtube, Vimeo, Instagram
• 5 Best Free Mac DJI Video Editing Software For DJI Phantom/Inspire
• Choppy DJI Spark Video in iMovie
• DJI 4K videos don't play on VLC? 2 Methods to Fix it.
• Top 5 Best Drone Video Players of all Time

Hot Articles & Reviews

• Best Spark Video Converter for Mac: Encode Spark Videos
• Top 8 iMovie Converter for Mac
• Best Editing Workflow of 4K H.265 with Final Cut Pro 7/X
• Play 4K video on Edal 2017 the Latest Aluminum 4K Android 6.0 TV Box
• Convert DJI Phantom 4 4K Recording To Play On IPad/WMP/VLC, Edit On FCP/IMovie/WMK And Upload To YouTube/Vimeo/FaceBook

Any Product-related questions?support@pavtube.com

Source:http://device-camcorder-tips.blogspot.com/2018/03/compress-dji-mavic-air-4k-to-1080p.html

How to Convert HD MTS to M4V/MOV for Playback on iPad Series

An MTS file is a video file saved in the high-definition (HD) MPEG Transport Stream video format, commonly called "AVCHD". MTS files are often used by Sony, Panasonic, and other HD camcoders. It is worth to say that MTS files can not be played directly by most media player or reconginized by most tablets, smartphones because of its video audio codec. So if you want to sync some MTS files to your iPad with iTunes for sharing with friends, how to do?

Converting MTS to iPad supported video formats could solve this problem, for example, converting MTS to M4V/MOV will be a good way. You can search MTS to M4V/MOV converter in Google and pop up hundreds software in the page. The point is how to get the best one. Pavtube Video Converter Ultimate | Mac (review) always stands out from its competitors which could convert HD MTS to M4V, MOV with just 3 steps.

Moreover, apart from converting MTS to M4V/MOV, it also allows you to import Blu-ray/DVD, MOV, AVI, MKV, AVCHD, VOB with resolution of 4K/2K/HD/SD to any formats you need including MOV, M4V, H.264/H.265 MP4, 3GP, M4V and more. For those people who want to do some postproduction to the MTS footage, video editing is also availabe here.

You are able to flip MTS video horizontally or vertically, rotate video clockwise or counterclockwise to get it displayed in the right angle, trim or cut MTS video to remove unwanted parts or segments, crop video to cut off unwanted black borders or area, personalize MTS video with video/image/transparent text watermark, split large video into small parts by file size, count or length, merge separate video clips into one, adjust picture effect like brightness, contrast, saturation or apply special rendering effects like Gray, Flip Color or Aged Flim, etc to your video or add external SRT/ASS/SSA subtitles to videos. To sum up, its features are beyond your imagination. Have a try!

How to upload recorded HD MTS videos to iPad Series

Step 1. Import captured MTS videos

Download and open up recorded HD MTS videos to this MTS to M4V/MOV converter by clicking “File” ＞ “Add Video/Aideo.”

Step 2. Choose M4V as output video format

All models of iPad support M4V/MOV formats, just go to the format list to find M4V option, select "M4V-MPEG-4 Video(*.m4v)" or "MOV-QuickTime(*.mov)"-->"Common Video", or "H.264 HD Video(*.mp4)" from "HD Video" category.

Step 3. Edit recorded HD MTS videos (Optional)

Go to "Video Editor" window to create your personal videos by trimming, cropping, adding watermarks and special effects.

Step 4. Convert MTS to M4V for iPad

One click on the red button “Convert” to start to convert recorded HD MTS videos to iPad compatible video format - M4V. After conversion, transfer the converted MTS videos to iPad .

Play ISO on Cyberlink PowerDVD

As the world's number 1 media player software for Windows 10, Cyberlink PowerDVD allow users to watch Blu-ray, 4K, 3D, HD, MKV & DVD videos with enhanced surround sound audio. Have some ISO files backed from Blu-ray or DVD disc and wish to play ISO files on Cyberlink PowerDVD? You can follow the steps below to playback ISO file.

Steps to play ISO file on Cyberlink PowerDVD

Step 1: Browse and find the ISO file in Cyberlink PowerDVD, either in the Movie Library or via the My Computer tab.

Step 2: Select the ISO you want to play and then click on the play button.

Step 3: Cyberlink PowerDVD displays a message asking you to install the required drive

Step 4: Click on Install button and then Yes when prompted in the User Access Control dialog.

Step 5: Cyberlink PowerDVD will start playing the ISO file once the drive is installed.

Problems when viewing ISO files on Cyberlink PowerDVD

"I upgraded from PDVD 16 to 17 for my preparation of playing UHD movies. However I'm unable to play .iso files with PDVD17, it plays blu-ray dvd folders but won't reconize .iso files. I have a physical copy of PDVD 16 so I'm not worried about reverting back. I'm just wondering if there is a solution?"

"Just upgraded to PowerDVD Ultra Version 16, and the .ISO file support no longer seems to be working Is this a known bug being worked on? "

"PDVD15 fails to play any encrypted iso BD files. "

Solutions to fix Cyberlink PowerDVD not play ISO files?

Sometimes, your virtual drive might not be compatible with Cyberlink PowerDVD. If Cyberlink PowerDVD can not detect your virtual drive, your mounted ISO image cannot be played back in Cyberlink PowerDVD. Therefore, make sure to upgrade your virtual drive to make it adapt with your Cyberlink PowerDVD.

As for playing encrypted ISO files on Cyberlink PowerDVD, you will need a specific application to bypass that protection. Here, we highly recommend Pavtube ByteCopy to you. The program can assist you to powerfully bypass all protection from the Blu-ray/DVD ISO files in the background with its built-in disc decrypter. So that you can then freely convert the ISO files to Cyberlink PowerDVD playable digital file formats such as AVI, WMV, MP4, MKV, MP4, MOV, MPEG, Divx, Xvid, 3GP, 3G2, etc with no limitation.

Related article: Rip DVD to PowerDVD 16 | Best ISO File Converter | ISO to MKV with AAC

Pavtube ByteCopy is pretty simple to use, no matter experienced user or fresh could handle it very well. In addition, it has perfect compatibility with the new Windows 10/8.1/8/7. What's more, it supports to produce high quality conversion results, you can't tell the difference between the ripped video and the original Blu-ray/DVD ISO image file.

Step by Step to Rip Encrypted ISO Files for Cyberlink PowerDVD Playing

Step 1: Load ISO files into the application.

Initiate the program on your computer, on the main menu bar, click "File" > "Load IFO/ISO" to import ISO files to the program. 

Step 2: Define the output format.

Clicking the Format bar, from its drop-down list, select one of Cyberlink PowerDVD supported digital file formats such as "Divx AVI - Audio Video Interleaved(Divx)(*.avi)" under "Common Video" main category.

Tips: Click "Settings" on the main interface to open "Profile Settings" window, here, you can flexibly adjust the output profile parameters including video codec, resolution, bit rate, frame rate, audio codec, bit rate, sample rate, channels, etc as you like to get better output video and audio quality.

Step 3: Begin the conversion process.

After all setting is completed, hit the "Convert" button at the right bottom of the main interface to begin the ripping process from ISO to Cyberlink PowerDVD supported playback digital file formats.

When the conversion is finished, click "Open Output Folder" icon on the main interface to open the folder with generated files. Then you can directly view the converted digital files on Cyberlink PowerDVD without any limitation.

Related Articles

• Stream ISO Files to Apple TV 4 on Mac
• Play ISO Files on WDTV Media Player
• Lossless Convert ISO to MKV for Plex
• Play ISO Files on Android
• Watch BD DVD ISO Movies on Xbox One

Hot Articles & Reviews

• Review of Best ISO Ripper
• ISO to USB-C Converter
• Play ISO Files on Xbox One via Plex
• Preview ISO Files with Box Webapp
• Blu-ray ISO to Surface Tablet

Any Product-related questions?support@pavtube.com

Backup Blu-ray Movies with Chapter Markers Preserved

As a standard feature in Blu-ray disc, chapter markers can let viewers and listeners quickly skip through sections of a program using the Previous and Next buttons on their playback app or device to quickly jump to these points in the movie. The chapter markers can be recognized during playback by various portable devices, media players and also most standard DVD and Blu-ray players.

For people who plan to backup movies to protect it from being damaged or for convenient playback on different devices without flipping through the whole Blu-ray disc collection, you may wish to preserve your chapter markers when you perform the Blu-ray disc ripping or copying process. The good news is that here comes Pavtube ByteCopy, which can assist you to rip Blu-ray movies with chapter markers well preserved in the following 2 two ways:
- 1:1 full disc copy of Blu-ray disc with original file structure including chapter markers, audio tracks and subtitle streams and also special features/bonus contents/extras well preserved.
- Make a lossless multi-track MKV copy from Blu-ray with all your desired audio streams, subtitle tracks and chapter markers well preserved.

Related article: Extract SRT Subtitles from Blu-ray | Encode Blu-ray to H265 with GPU Acceleration | Digitize Blu-ray/DVD on Mac

Pavtube ByteCopy can powerfully bypass all Blu-ray copy protection and region code, in addition, it also keeps constant update with perfect support for the new MKB63/MKB62 used on many recently released Blu-ray disc. Apart from chapter markers, you can also get best sound quality when ripping Blu-ray with 7.1 surround sound when using above 2 methods to copy or backup Blu-ray movies.

For your great convenience, Pavtube ByteCopy is available on both Windows and Mac platform. For Mac users, you can switch to download Pavtube ByteCopy for Mac to perform Blu-ray chapter marker ripping process on macOS High Sierra, macOS Sierra, Mac OS X El Capitan, Mac OS X Yosemite and Mac OS X Yosemite.

Step by Step to Backup Blu-ray Movies with Chapter Markers Well Preserved

Step 1: Load Blu-ray disc.

Insert the Blu-ray disc into your computer's Blu-ray drive. If your computer doesn't ship with a drive, you will need to purchase an external USB Blu-ray drive to read the data on Blu-ray disc. Then press "File" > "Load from disc" option on the main interface, alternatively, you can also import Blu-ray folder or Blu-ray ISO files with the program.

Step 2: Rip Blu-ray with chapter markers.

Full disc copy of Blu-ray with chapter markers

On the top tool bar of the main interface, use the  option to make an entire disc copy of original Blu-ray structure with chapter markers well preserved.

Lossless MKV copy of Blu-ray with chapter markers

From "Format" bar drop-down list, select "Lossless/encoded multi-track MKV(*.mkv)" under "Multi-track Video" category to backup Blu-ray with your chapter markers and your wanted subtitle languages and audio tracks.

Step 3: Adjust multi-task settings.

When you output the lossless/encoded multi-track MKV format, all the subtitle languages and audio tracks in original source file will be preserved. If there are some subtitle languages or audio tracks you don't like, you can click Settings button and go to Multi-task Settings window to uncheck and remove them under Audio tab and Subtitle tab.

Step 4: Start Blu-ray chapter marker ripping process.

Click the button "Convert" on bottom right to start entire Blu-ray disc copy or Blu-ray to lossless MKV conversion with chapter markers. After conversion, just press "Open Output Folder" to find generated videos. You can set auto shut down by checking the box of "Shut down computer after conversion".

Related Articles

• Samsung Blu-ray Player Doesn't Play MP4 Video
• Two Ways to Play all MKV movies on any DVD Player
• MKV Not Supported by Blu-ray Player via USB?
• MKV Not Supported by Blu-ray Player via USB?
• MKV Not Supported by Blu-ray Player via USB?

Hot Articles & Reviews

• Rip Blu-ray to MP4 with Multiple Audio Tracks
• Lossless Copy Blu-ray to MKV for JRiver Media Center
• Rip Blu-rayss with Desired Subtitles or All Subtitles
• Digitize Blu-ray Collection for Better Storage and Playing
• Best Blu-ray Backup Method: BD to M2TS vs. BD to MKV

Any Product-related questions?support@pavtube.com

Merge 4K Video into One File

As a standard feature in Blu-ray disc, chapter markers can let viewers and listeners quickly skip through sections of a program using the Previous and Next buttons on their playback app or device to quickly jump to these points in the movie. The chapter markers can be recognized during playback by various portable devices, media players and also most standard DVD and Blu-ray players.

For people who plan to backup movies to protect it from being damaged or for convenient playback on different devices without flipping through the whole Blu-ray disc collection, you may wish to preserve your chapter markers when you perform the Blu-ray disc ripping or copying process. The good news is that here comes Pavtube ByteCopy, which can assist you to rip Blu-ray movies with chapter markers well preserved in the following 2 two ways:
- 1:1 full disc copy of Blu-ray disc with original file structure including chapter markers, audio tracks and subtitle streams and also special features/bonus contents/extras well preserved.
- Make a lossless multi-track MKV copy from Blu-ray with all your desired audio streams, subtitle tracks and chapter markers well preserved.

Related article: Extract SRT Subtitles from Blu-ray | Encode Blu-ray to H265 with GPU Acceleration | Digitize Blu-ray/DVD on Mac

Pavtube ByteCopy can powerfully bypass all Blu-ray copy protection and region code, in addition, it also keeps constant update with perfect support for the new MKB63/MKB62 used on many recently released Blu-ray disc. Apart from chapter markers, you can also get best sound quality when ripping Blu-ray with 7.1 surround sound when using above 2 methods to copy or backup Blu-ray movies.

For your great convenience, Pavtube ByteCopy is available on both Windows and Mac platform. For Mac users, you can switch to download Pavtube ByteCopy for Mac to perform Blu-ray chapter marker ripping process on macOS High Sierra, macOS Sierra, Mac OS X El Capitan, Mac OS X Yosemite and Mac OS X Yosemite.

Step by Step to Backup Blu-ray Movies with Chapter Markers Well Preserved

Step 1: Load Blu-ray disc.

Insert the Blu-ray disc into your computer's Blu-ray drive. If your computer doesn't ship with a drive, you will need to purchase an external USB Blu-ray drive to read the data on Blu-ray disc. Then press "File" > "Load from disc" option on the main interface, alternatively, you can also import Blu-ray folder or Blu-ray ISO files with the program.

Step 2: Rip Blu-ray with chapter markers.

Full disc copy of Blu-ray with chapter markers

On the top tool bar of the main interface, use the  option to make an entire disc copy of original Blu-ray structure with chapter markers well preserved.

Lossless MKV copy of Blu-ray with chapter markers

From "Format" bar drop-down list, select "Lossless/encoded multi-track MKV(*.mkv)" under "Multi-track Video" category to backup Blu-ray with your chapter markers and your wanted subtitle languages and audio tracks.

Step 3: Adjust multi-task settings.

When you output the lossless/encoded multi-track MKV format, all the subtitle languages and audio tracks in original source file will be preserved. If there are some subtitle languages or audio tracks you don't like, you can click Settings button and go to Multi-task Settings window to uncheck and remove them under Audio tab and Subtitle tab.

Step 4: Start Blu-ray chapter marker ripping process.

Click the button "Convert" on bottom right to start entire Blu-ray disc copy or Blu-ray to lossless MKV conversion with chapter markers. After conversion, just press "Open Output Folder" to find generated videos. You can set auto shut down by checking the box of "Shut down computer after conversion".

Related Articles

• Convert Merge AVCHD MTS/M2TS Files
• Merge Recorded Video
• Top 10 Video Cutter Software
• Add Subtitles to MOV Video
• How to Extract SRT Subtitles from DVD?

Hot Articles & Reviews

• Top 5 Best Free Video Joiner Softwares
• How to Merge multiple 3D Clips into one?
• How to Merge Separate MOV Files into One?
• Cut and Join Samsung NX1/NX500 H.265 Videos
• Split Large Video into Small Parts by File Size, Count or Length

Any Product-related questions?support@pavtube.com

Solve MakeMKV No Disc Issue

The "No Disc" issue of MakeMKV to Rip Blu-ray/DVD

"I've ripped over 40 blu-rays and DVD's so far, however I have stumbled upon a few of them giving a "No disc" error. I have searched and found that it could be an issue with the drive, but some of the movies have been just out of the foil and the drive still rips other Blu-rays without issues. The issue is only regarding the blu-ray discs. Specs below:
OS: Win10 Build 14393
BD-ROM: USB3.0 Slim drive ECD008-SAU3
Movies affected: Expendables, Martian, Bourne series + some other movies.
MakeMKV version: 1.10.2 Beta

Not sure if the pc specs are necessary but the rig is with a 5960x cpu and 32g of memory. I don't have any other BD-ROM's, but I've thought of getting another "real brand" one to verify with. Just not entirely sure why it wouldn't read some specific discs? Could it be the encryption? Neither MakeMKV or the OS sees this."

Why no disc when using MakeMKV to rip Blu-ray/DVD disc?

"No disk" means MakeMKV asked the operating system about the status of the drive, and the OS said "No disk". While encryption issues give different errors - either that the access key used to read the disk was not acceptable (Key exchange failure), or debug errors because unexpected results were returned. Since MakeMKV relies upon the operating system telling it there is a disk in the drive, and allowing it access to it. If the operating system says "no disk", it will block MakeMKV's access to the drive.

Solution to fix MakeMKV no disc issues

Apparently that the Blu-ray drive that you are using is suffering incompatibilities with your OS, it would be much ideal for you to buy the latest BD drive which will let formerly unmountable BD disks now mounted rapidly and rip without problem.

Best MakeMKV alternative to fix the no disc issue

Some users reflects that they downloaded Pavtube Ripper application and the disk mounted immediately since Pavtube Blu-ray Ripper software doesn't depend on the system to mount the Blu-ray/DVD disc. It can automatically detect the Blu-ray/DVD disc inserted on your DVD/BD drive, and then scan the disc and select the main Blu-ray/DVD title for you.

If you are looking for a combo function of Blu-ray/DVD Ripper as best MakeMKV alternative, we highly recommend Pavtube ByteCopy (get Mac version) to you. This cross-platform application has perfect compatibility with the new Windows 10/8.1/8/7 and also macOS High Sierra, macOS Sierra, Mac OS X El Capitan, Mac OS X Yosemite and Mac OS X Mavericks, etc. It features built-in powerful disc decrypter to assist you to automatically bypass all Blu-ray/DVD copy protection in the background. In addition, it also keeps constant update with perfect ability to bypass the new encryption used on many recently released Blu-ray/DVD disc.

Unlike MakeMKV that only allows you to produce a lossless MKV file from Blu-ray/DVD disc, this powerful application also assists you to make a 1:1 full disc copy of Blu-ray/DVD with original file structure, fast main Blu-ray/DVD copy without unwanted comments, ads or trailers. You can also choose to rip Blu-ray/DVD to any of your desired digital file formats or hot devices and applications preset profile formats.

Apart from the core Blu-ray/DVD disc ripping function, the program also offers advanced profile parameters settings functions to allow you to flexibly adjust output video codec, bit rate, frame rate, resolution, audio codec, bit rate, sample rate, channels, etc. The versatile video editing function can facilitate to trim/crop/watermark/apply effect/add watermark to video. The beneficial subtitle function such as selecting desired internal subtitles, enabling forced subtitles  or adding external subtitles to Blu-ray/DVD, etc also assists you to better understand Blu-ray/DVD movies after the ripping process.

How to Fix MakeMKV No Disc Issue with Best MakeMKV Alternative?

Step 1: Load Blu-ray/DVD disc with the program.

Insert DVD into your computer's optical DVD drive, for loading Blu-ray disc, you will need an external Blu-ray drive. The run the program on the computer, click "File" > "Load from disc" to load Blu-ray or DVD disc into the program. When both Blu-ray or DVD disc exists, the program will load DVD disc first.

Step 2: Copy/Rip Blu-ray/DVD disc in different ways.

Full disc copy

Make a full disc copy by hitting the icon on the top tool bar of the main interface.

Main movie copy

From "Format" bar, select "Copy" > "Direct Copy" to copy the main movie of the Blu-ray/DVD disc.

Lossless Multi-track MKV copy

To preserve all your wanted audio tracks and subtitles streams in the source movie, you can use the program to rip Blu-ray/DVD to " Lossless/encoded multi-track MKV(*.mkv)" under "Multi-track Video" category.

Output digital file formats or device preset profile formats

From "Format" bar drop-down list, select one of your desired file formats or device preset profile formats according to your own needs.

Step 3: Start final conversion process.

After finishing all the settings, go back to the main interface, press the right-bottom "Convert" button to start to copy or rip protected Blu-ray/DVD movies to any of your desired file formats.

When the conversion is completed, click "Open output folder", a window will pop out with all your converted files. Then feel free to copy your favorite Blu-ray/DVD to external hard drive, play with VLC on computer, transfer to portable devices or stream Blu-ray/DVD movies to TV via home media server or from USB drive.

Related Articles

• Top 6 Best Alternatives to MakeMKV
• MakeMKV VS ByteCopy VS DVDFab
• 3D Blu-ray to Full HD MKV with MakeMKV

Hot Articles & Reviews

• Best Blu-ray Ripper Review VS MakeMKV VS DVDFab
• MakeMKV DVDFab Megui AnyDVD Fail to Rip Blu-ray
• Best Alternatives to MakeMKV

Any Product-related questions?support@pavtube.com